Die Cisco CCNA 200-125-Prüfung ist eine grundlegende Prüfung der Cisco-Zertifizierung. Wenn Sie sich der Cisco-Industrie anschlie?en m?chten, sollten Sie mit der Cisco CCNA-Zertifizierung beginnen. 200-125 ist ein erforderlicher Test für die Cisco CCNA-Zertifizierung. Nun ist das Bestehen der Cisco 200-125 Prüfung für Sie leicht. Unsere neue aktualisierte Version V21.02 der Cisco CCNA 200-125-Zertifizierungsdumps ist verfügbar.
Es gibt 647 Q & As in Cisco CCNA 200-125 Exam Certification Dumps, mit denen Sie den Test problemlos vorbereiten und bestehen k?nnen. Im Folgenden finden Sie einige neue, aktualisierte 200-125-Zertifizierungs-Dumps in V21.02.
1.What would be the effect of issuing the command ip access-group 114 in to the fa0/0 interface?
A. Attempts to telnet to the router would fail
B. It would allow all traffic from the 10.4.4.0 network
C. IP traffic would be passed through the interface but TCP and UDP traffic would not
D. Routing protocol updates for the 10.4.4.0 network would not be accepted from the fa0/0 interface
Answer: B
2.What would be the effect of issuing the command ip access-group 115 in on the s0/0/1 interface?
A. No host could connect to Router through s0/0/1
B. Telnet and ping would work but routing updates would fail.
C. FTP, FTP-DATA, echo, and www would work but telnet would fail
D. Only traffic from the 10.4.4.0 network would pass through the interface
Answer: A
3.The traffic from Branch to the main office is using the secondary path instead of the primary path connected to R2. Which cause of the issue is true?
A. The network 192.168. 11. 0/30 was not advertised into EIGRP on Branch2
B. The IP address was misconfigured between the Branch2 and R2 interfaces
C. EIGRP packets were blocked by the inbound ACL on branch
D. The primary path has more link delay configured then secondary path which causes EIGRP to choose the secondary path.
Answer: C
4.The traffic from Branch to the main office is using the secondary path instead of the primary path connected to R2. Which cause of the issue is true?
A. The network 192.168. 11. 0/30 was not advertised into EIGRP on Branch2
B. The IP address was misconfigured between the Branch2 and R2 interfaces
C. EIGRP packets were blocked by the inbound ACL on branch
D. The primary path has more link delay configured then secondary path which causes EIGRP to choose the secondary path.
Answer: C
5.The GRE tunnel between r3 and Branch 1 is down. Which cause of the issue is true?
A The tunnel source loopback0 interface is not advertised into EIGRP in Branch1.
B The tunnel source loopback0 interface is not advertised into EIGRP in R3
C The EIGRP neighbor relationship was not formed due to EIGRP packets blocked by inbound ACL on R3
D The EIGRP neighbor relationship was no formed due the IP address being misconfigured between the R2 and R3 interfaces
Answer: C
Mit unseren Cisco CCNA 200-125-Zertifizierungsdumps V21.02 k?nnen Sie den Test im ersten Versuch bestehen.
Bitte beachten Sie: Das Cisco-Unternehmen ?ndert alle zwei Wochen die CCNA-Prüfungsfragen von 200-125.